Sourcing HTN LCD Screen Just in One Place

- The Ultimate Solutions

You need more than just a display, you need a veteran supplier who has been in the field for 20 years to build your brand and grow your profits. Let DISPLAYBLY help you achieve business success.

Table of Contents

Tutorial: Dr Pan Teaches Teaches HTN LCD Screen

Dr Pan:Welcome to DISPLAY Museum. I am Dr Pan, the curator of Museum.

Greg: Hello, Dr Pan. I am Greg. I came here to learn about HTN LCD Screen. 

Dr Pan: Hello, Greg.  HTN is the abbreviation for High Twisted Nematic. The main difference between TN, HTN, STN and FSTN LCD is the view angle. From the definition, the maximum view angle of HTN LCD is 110 degree. Take this HTN positive LCD for example. The view angle is 6 o’clock direction and it can be seen very clearly in the 6 o’clock direction and the front side.The display content can only be seen in a small angle in 3 o’clock , 9 o’clock and 12 o’clock direction.

 When it is a positive and reflective display, it can display without LED backlight; when it is a positive and transmissive/ transflective display, it can’t display without LED backlight, the background color is grey and the letters are black.

When it is a negative and transmissive/ transflective display, it can’t display without LED backlight, the background color is blue and the color of the letters is the color of LED backlight.

By the way, no matter it is a positive or negative display, the background color is affected by the color of LED backlight on some level. That is why the color of LED backlight is usually white.

Theoretically, we can add a blue film to HTN negative LCD, it may look like this. Actually, if you want it to look better, we strongly suggest that you choose STN negative LCD with blue background, which looks much better with wider view angle.

 The maximum COM is 16, so it still can’t display too many segments, and it isn’t suitable for the high-end devices. But it also performs very well in the simple display content: calculator and alarm clock.

Greg: Thank you, Dr Pan. Now I got it.

Dr Pan: Welcome to contact us if you have any questions.

Feature Products

There are more than 100 new prototypes being developed every month and only a few selected typical feature products are displayed. 

Display Type: HTN / Segment

Display Size: Customized

Display Mode: Positive/Transflective

Display effect: Grey Background and Black Letters

Application: Time-meter

Backlight: White

Display Type: HTN / Segment

Display Size: Customized

Display Mode: Negative/ Transmissive

Display effect: Blue Background and White Letters 

Application: Illumination Equipment

Backlight: Sky Blue

Display Type: HTN / Segment

Display Size: Customized

Display Mode: Positive/Transmissive

Display effect:  Grey Background and White Letters

Application:  Cash Counting Machine

Backlight: White

Display Type Display Mode Polarizer Background Letters Backlight
HTN
Positive
Reflective
Grey
Black
No
HTN
Positive
Transmissive
Grey
Black
Yes
HTN
Positive
Transflective
Grey
Black
Yes or No
HTN
Negative
Transmissive
Blue
White
Yes
HTN
Negative

Transflective(rarely used)

Blue
White
Yes

DISPLAYBLY is among the top monochrome LCD screen manufacturers in China. We have been supplying both small and large companies with eco-friendly and ISO-certified monochrome LCD screens in different display types, including TN, HTN, STN, FSTN, and VA,  and different display contents, including segment and dot matrix, at wholesale for 2 decades. 

TN LCD Screen

Cheapest monochrome LCD screen solution, view angle: 90 degree.

HTN LCD Screen

Cheaper monochrome LCD screen solution, view angle: 110 degree.

STN LCD Screen

Full Vew angle monochrome LCD screen, view angle: 210~255 degree.

FSTN LCD Screen

True full view angle monochrome LCD screen, view angle wider than STN.

VA LCD Screen

True black background monochrome LCD screen with 3 view directions.

Segment LCD Screen

Only be used for simple display content of numbers and patterns at a specified position. Number “8” is composed of 7 segments

Dot Matrix LCD Screen

It consists of many arrays of dots. Each dot is independently controlled and it can display complex variable character or pattern.

Quote for Custom LCD Screen

Fill in the online form. We will contact you within 1 working day, please pay attention to the email with the suffix “@displaybly.com”.

HTN LCD Screen Solutions For ODMs and OEMs

HTN LCD screens are highly popular due to their low-cost and high customization. Our experienced team can develop the right solution with an integrated assembly of different technologies to your hands.

Display Technologies

  • Transmissive, transflective and reflective polarizers
  • Positive and negative modes
  • ITO glass thickness: 0.3mm, 0.4mm, 0.55mm, 0.7 mm and 1.1mm
  • Static driving mode and dynamic driving mode
  • Shapes: round, rectangle, octangle and through-holes
  •   View angle: 12 O’clock, 3 O’clock, 6 O’clock, 9 O’clock
  • Silkscreen: Black mask, red, green, blue, multi-color printing
  • Touch solutions: one-sided ITO film touch technology and double-sided ITO film touch technology
  • Connection: PIN, zebra, FPC

Characteristics

  • Cheaper
  • Only suitable for segment LCD display
  • Maximum COM:16
  • view angle is narrow, wider than TN, three view directions
  • a lower requirement for raw material
  • widely used and  easy to be produced 
  • simple display content and low contrast ratio
  • can’t be used in high end devices

Why Work With Us

No more endlessly wasting your valuable time on lousy design monochrome LCD screens. DISPLAYBLY’s goal is to let you sit back and relax. Our consultant will keep you informed of the production progress throughout and we take care of all the hard works, including trade stuff, clearance, and logistics, etc.

Experienced Team

More than 10 years experience professional engineer team.

High Capacity

More than 10 production lines and can provide 50 thousand pieces of LCD module per day.

Modern Technology

The world’s leading technology and complete sets of imported production equipments.

Strict Quality Control

Implement ISO9001 quality control system to make high-quality standard products.

A Few Steps of LCD Module Production Process

There are more than 30 steps for the production process of LCD module and here only a few typical production steps are displayed. 

ITO Glass Washing

Full Automation IC Bonding Machine

Pressing ACF

Gluing IC

Soldering FPC

High Temperature De-bubble Machine

Full Automation PIN Assembly Machine

Full Automation LCD Assembly Machine

Testing LCD Module

New Custom LCD Display Design Development

01 Communication

To start, you have to elaborate on your specific demands. It is best if you can offer your drawings. From our experience, many of our customers only have a concept in their mind and they ask for a quote or samples directly. This is not how it works. Sometimes a video conference or a face-face conference is necessary before we can fully understand your requirements. It usually involves a lot of questions, such as: 1. What is the application of the products ? 2. What is the timeline you’re working from? 3. What problem do we expect us to solve for you?

02 Design

After the first step, we both have some basic understandings . We pass some projects which are not suitable for us. And we can move on the next step: design. To better service our customers and save both of us some time, we will ask you to fill in some of our online forms. Online form custom LCD module. This is the basic information we have to acquire. If you are not certain about some parameters of custom LCD module, we will make the most reasonable design for you from engineering prospect.

03 Quote

Once the preliminary drawings are approved, we offer an official quotation which includes the unit prices, the tooling fees and the other details. Submit the payment if you are happy with the prices. If you can’t accept the prices, we can go back to step two. we can make it cheaper by simplifying the design. After we receive the payment, we will start to make the official drawings. It usually takes 1 to 3 days.

04 Prototypes

At this stage, we build samples based on tooling orders to justify proof of the concept. We can’t start the prototype process unless you sign on the official drawings. It usually takes 7 to 25 days to finish the samples base on the difficulties.

05 Validation

You as the customer validate the efficacy of the custom design before we agree to move into the larger production. It is normal to make several times of prototypes. One time tooling fee and no extra cost until you are satisfied.

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@displaybly.com”

Production Videos

Are you still wondering how we produce  COG LCD module, COB LCD module, LCD module hybrid structure, LED backlight module, etc? Check the assembly process videos below and you will find your answers. 

A Review of Assembly Process of LCD Module Hybrid Structure with Membrane Switch Button
A Review of Assembly Process of LCD Module Hybrid Structure with LEDs on the PCB
A Review of Assembly Process of COB LCD Module for Fueling Equipment

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@displayman.com”