Welcome to DISPLAYBLY.COM. Today we are going to introduce an assembly process of LCD module Hybrid Structure for industrial control equipment. First, remove the protection film from the top of the LED backlight and the protection film from the bottom of the LCD screen and assemble them together by hand. Second, solder the FPC of…
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assembly process of monochrome dot matrix COG LCD module for industrial equipment. First thing first, let me explain the specialities of this COG LCD module. Usually, the connection methods of LED backlight are wire, metal PIN, PCB with hard PIN, etc. We can see there…
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assembly process of LED Segment Display for Industrial indicator. First, sweep the dedicated plastic film mold of the PCB with TIN and make it evenly cover on it. Second, put the PCB into the LED soldering machine and the LEDs will be automatically soldered onto…
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assemble process of COB LCD module for smart terminal system. First, install the FPC connector into the PCB and solder it with TIN. Second,turn on the LED backlight and check if there is any problem. Clean it if there is any dust. Third, put the…
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assembly process of edge LED backlight for massage chair. First, put the dedicated stainless steel mold onto the surface of the PCB and make the TIN evenly cover on it. Second, put the PCB into the LED soldering machine and the LEDs will be automatically…
Today we are going to introduce a unique LCD module. It is called COG LCD module in the traditional way since the IC is on the glass. But there is a huge PCB on the back and a metal frame in the front which holds the LCD screen and the LED backlight onto the PCB.…
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assemble process of OLED hybrid structure for nursing equipment. First, put the double-sided tape on the back of the PCB. Second, solder the FPC of OLED onto the PCB with tin. Third, brush off the extra tin on the PCB with industrial alcohol. Fourth, rip…
Welcome to DISPLAYBLY.COM. Today we are going to introduce a typical assemble process of COG LCD Module for nursing equipment. First, remove the protection film from the top of the LED backlight and the protection film from the bottom of the LCD and assemble them together by hand. Second, check if the LED backlight is…
Welcome to DISPLAYBLY.COM, a display solution provider with more than 10 years of experiences. Design and manufacture of OLED, LCD screen, LCD module and LED backlight products. Facebook: https://www.facebook.com/DisplayBLY/ Linkedin: https://www.linkedin.com/company/displaybly/
Welcome to DISPLAYBLY.COM. Today we are going to introduce an assemble process of COB LCD module for storage battery and it is big. First, Visual inspection. Even though the LCD screens have been tested and passed the quality test, they still have to be checked again before the assembly. Second, remove double-sided release paper and…
